Tigger's Bouncing!!!!

Good work, Colin ! :)

1965 Commer (1592ccm) series IIa Bluebird Highwayman
a5b8fa7d-adbb-4a07-89d1-b7311f6bd403_zps2bfbe7f7.jpg
 
Well, I made a start at least......only had an hour before the heavens opened up and stopped play:(
The old Weber...
DSC01033_zpsede16b24.jpg


Got the manifolds and exhaust bolted back on, then realised the rain was pouring off the roof right down my legs ...

DSC01034_zps00cbdc16.jpg


th_Tigger002.jpg
''COMMER'EnSayThat''
 
So, now I need help please..

I guess 1, is fuel ...2 is vacuum ...but what about 3??

DSC01035_zps818b3580.jpg


Left being 1, 2 middle and 3 right

th_Tigger002.jpg
''COMMER'EnSayThat''
 
No.1 is fuel feed, no.2 is a breather, no.3 needs to be blocked up, a bit of hose with a bolt clipped in will do it.
Looks like you're missing the little cable clamp for the choke.


4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
quote:
Originally posted by Enigma

DSC01036_zps34c9c919.jpg


and the throttle cable goes here? so where does the choke go?

th_Tigger002.jpg
''COMMER'EnSayThat''






The bracket with the three holes operated the choke, there is normally a nipple on the left hand hole to clamp the cable. You will also need some method of clamping the outer cable - check out 'Mini abutment plate' on ebay.



bth_IMAG0017.jpg

Summer's Coming
 
So just to make sure.. 1 is fuel intake... 2 is for the vacuum hose to dizzy and 3 needs to be blocked [?]

th_Tigger002.jpg
''COMMER'EnSayThat''
 
Vacuum hose to dizzy is the small spout that sticks up vertically near the mounting flange

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Thanks for the pic John, that makes the choke seem easier now I know where it should go[8D]

I didn't get round to following the hose from the manifold back to see where it went, but its fine just to disconnect it?

th_Tigger002.jpg
''COMMER'EnSayThat''
 
Unless it's connected to a brake servo, is there one fitted to Tigger?

bth_IMAG0017.jpg

Summer's Coming
 
quote:
Originally posted by Enigma

So just to make sure.. 1 is fuel intake... 2 is for the vacuum hose to dizzy and 3 needs to be blocked [?]

th_Tigger002.jpg
''COMMER'EnSayThat''






As Tim said, use the small vac connection near the flange and block off the other one. Leave the overflow open.

bth_IMAG0017.jpg

Summer's Coming
 
The missing link http://www.ebay.co.uk/itm/CHOKE-CABLE-RETAINING-PIN-AUE34-TRIUMPH-SPITFIRE-SU-FREE-UK-POSTAGE-/230860582789

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Thanks John and Tim.....don't now how I'd manage without you guys[8D][8D]

I have no idea if Tigger has a servo John, I will follow the pipe in the morning....:)

th_Tigger002.jpg
''COMMER'EnSayThat''
 
Back
Top