Nice work............Chip 
"You,re only supposed to blow the bloody SLIDING doors off"
"You,re only supposed to blow the bloody SLIDING doors off"
My New Baby!!!
- Thread starter nickclubman
- Start date
Took the van for a secret MOT today.....and its a pass! Any one in the nottingham area, I couldn't recommend this chap more. Based on old Basford, garage is called "need an MOT".
[8D] Great news well done [8D]
Gladys & Bernie
Gladys & Bernie
Woohoo
Commer Dandy by Dandy Caravans
The Colonel Mustard
Commer Dandy by Dandy Caravans
The Colonel Mustard
Nice one Nick, well done [8D]
"You,re only supposed to blow the bloody SLIDING doors off"
"You,re only supposed to blow the bloody SLIDING doors off"
There is always the worry about brake balance panky lol. Thought my rear shocks were leaking but they weren't.
All cleaned up inside, cupboards stocked....more stupid wires removed. There is a food festival buxton next weekend....I like food! This may be our first trip of the year. Need to contact Mr M though. The clutch master is leaking and on its way out.
Just working out the logistics for pandy Bazz. My life revolves around the university terms. So can only take leave during these times.
You know when you think....I shall just whip the clutch master cylinder of....2 bolts and a hose union...5 minute job! Started off with 2 half inch spanners and a 5/8's ended up with tools every where crow bars angle grinders...the lot. The top bolt hasn't moved in 38 years...and is now scattered cross the 4 winds....and I and covered in gunk...I hate brake fluid!
Even worse when you know a smear of grease would have prevented all that [}]
"You,re only supposed to blow the bloody SLIDING doors off"
]
"You,re only supposed to blow the bloody SLIDING doors off"
quote:
Originally posted by nickclubman
You know when you think....I shall just whip the clutch master cylinder of....2 bolts and a hose union...5 minute job! Started off with 2 half inch spanners and a 5/8's ended up with tools every where crow bars angle grinders...the lot. The top bolt hasn't moved in 38 years...and is now scattered cross the 4 winds....and I and covered in gunk...I hate brake fluid!
Never happens[8)]
Two's company
Originally posted by nickclubman
You know when you think....I shall just whip the clutch master cylinder of....2 bolts and a hose union...5 minute job! Started off with 2 half inch spanners and a 5/8's ended up with tools every where crow bars angle grinders...the lot. The top bolt hasn't moved in 38 years...and is now scattered cross the 4 winds....and I and covered in gunk...I hate brake fluid!
Never happens[8)]
Two's company
You know when you think....I shall just whip the clutch master cylinder of....2 bolts and a hose union...5 minute job! Started off with 2 half inch spanners and a 5/8's ended up with tools every where crow bars angle grinders...the lot. The top bolt hasn't moved in 38 years...and is now scattered cross the 4 winds....and I and covered in gunk...I hate brake fluid!
Many thanks to Martin and his speedy service...normal service is resumed clutch wise.. all new parts on the clutch system this last year....apart from the pipe...so that will go next....all fixings now have lashings of copper grease.