Dolly The Autosleeper

yh thanks for that mate, will raid the piggy bank for you and sort you out early this week if thats good for you?

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
that latch that you asked about two pages ago...
It's there so that you can have the side of the roof at an angle for more airflow; start leaning the side down and bring that latch up to meet it.
like this in fact
4783268736_3bf0974568.jpg
 
ah, yeah thats what i guessed but to be honest i didnt really have a clue lol;). the rain stopped today for a couple of hours :D so i have been busy :p will add some pics later on today. some juicy rust porn for you all lol:)

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
Give em a good buffing and they'll look the part, same as the ones on Bonnie:)

th_DCP_9909.jpg

Two's company
 
yh i may do, got to decide if the wheels look better with or without lol

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
well ill polish them up and try them. worst way if i dont like them im sure someone on here will find a use for them lol;)

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
yh but a sexy dodge;), i love the colour:p i would copy it but i think doing dolly that colour may be abit too much lol.

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
Pics of todays work :D
this is how it was when i got out there
6978765308_323565e35d_c.jpg

This is how she ended up
7124862423_ac3ae1a987_c.jpg

6978775808_656b3124ea_c.jpg

the rust acros the middle in the back is only surface rust, still rock solid
7124882657_17c35768d8_c.jpg

now the rusty bits, if you have young kids tell them to look away, this is hardcore:p
rear drivers corner
7124884323_9a9915b3fc_c.jpg

rear passenger quarter
6978764502_bf34ea8440_c.jpg

rear wheel arch
7124860361_a683abca1b_c.jpg

front drivers quarter and side panel
7124885333_769be192d9_c.jpg

passenger side
6978767612_60530a2a6b_c.jpg

front passenger quarter
7124858131_6868bc72b6_c.jpg
holes in all 4 corners but otherwise the back is pretty solid really, some surface rust but nothing major.

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
All very familiar:I
If you look back over Back of the Garage I did almost identical repairs.

th_DCP_9909.jpg

Two's company
 
put the units back in to cover it up[}:)]:D maybe worth while getting hold of tim or someone who has cut a van up for spares for some floor sections and wheel arch;)[?]

th_IMG_4730.jpg
 
yeah good idea mark. who is tim? LOL. will be reading through your thread soon john. all in all its not as bad as i expected it to be. and as ALL the holes are above the fooked outriggers i would have had to cut it out anyway to do them. looked at my windows as well today. draines were indeed blocked up, but it still leaking at the top of the window where the ally meets the wood. i think i may just need to whip the windows out and re-seal them, have also noticed there are no seals on the door windows at the bottom. but it dont look like it ever had them?

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
ah, i know commeracer. just didnt know his real name is tim lol. will have to drop him a message. will be needing 3 or 4 outriggers off woolfy soon lol. Do you know if you HAVE to have the Jacking points for mot or can they be done away with so i can just use a bottle jack? I only ask because my dad seems to think that if they are not there (cut off) then as long as you have a bottle jack it should not fail. but i think it would.

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
yh doing ok so far m8, quite pleased with myself so far not sure if she needs inner sills yet though, i hope not as i dont know how i could do them without losing my fluted panels and really wanna keep them on for know till i can afford new flutes all round

7085000413_eb70a8423f_q.jpg

Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
 
You must log in or register to reply here.
Back
Top