lol dont joke, that would be my luck down to a tea, will try the drains and see if that solves the prob, it seems to be seeping in between the wood and the ally frames[B)]
Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
Indeed, you'll probable only need about 18 inches of the flex. It would be nice to put it in front of the rad but all that hose would be very restrictive.
yeah true. if i fit it on either side i could always run whats left of the pipe from in front of the rad to the filter so it acts like a cold air feed. that would probably help
Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
Indeed, you'll probable only need about 18 inches of the flex. It would be nice to put it in front of the rad but all that hose would be very restrictive.
Two's company
thats where it was first fitted on the glendale by mr m
ah cool [8D]. i think i will run a small duct from in front of the rad to wherever i put the filter. that way it will have a cold air feed but wont be restricet as much
Dolly Commer Is Here http://66.129.69.181/forum/topic.asp?TOPIC_ID=6833
