DODGE SUPERVISTA

If you had a couple of square sheets of ply and spare runners you could use them as outside chairs? Couple of waterproof seat covers to keep off ketchup etc
 
Are the clearances good for installation?
I was told to call roadside assistance if I get a rear flat - apparently the rear tires are a royal PIA to change.

Those are nice rims!
 
I’ve never had to. I told garage to use the Commer jack I have when I got all four done as all perished. They didn’t bother and it took them nearly 2 hours. I’m surprised they didn’t break anything. Idiots.
 
No went on fine as long as above you use the correct jack. Even jacking on the chassis with a normal jack doesn’t normally work as they cant go high enough

Yer rims are lush, need polishing up properly and the red changing to white or cream at some point
 
New floor in and rails fitted and bolted through with 2.5mm unistrut and 2mm fabricated washers. What a pain in the a$$, floor is made of high quality small individual tiles I got at bargain price but nightmare to cut and shape to the change in floor height. Great and very safe rail system from the Renault Espace. Will last couple of years and will then probably shift over to an Unwin system built into the rear benches and middle front seat (aka Jon Green system) to allow movement of all seats.
Gearbox to fit and all fluids and MOT booked for Monday :-/

7112EFD4-079F-47E1-A448-96F1F1BB22B6.jpeg
 
You must log in or register to reply here.
Back
Top