woolfys welding day.

go woolfy go woolfy go! all you need to do is put a small blob on the edge of the hole all the way round till you have a smaller hole in the middle turn the welder back up then fill the small hole knowing the small blobs will stop you blowing the hole any bigger but as you say just play and keep smiling if the worst comes to the worst you just cut the panel out and start again. cant wait for the pictures:p:p:pspeaking of growing new arms mines grown back after severing it off at your place,sam said i just grazed it! they dont understand do they these women. and i dint cry!!!!!:)
 
well done woolfy :D ,next time i will bring a nuclear fuel rod for you to have a go at [}:)].

"you were only supposed to blow the bloody doors off"
 
Woolfys' new bits

Newbit1.jpg



Newbit2.jpg


Newbit3.jpg


Amazing the difference a bit of new metal makes [^]. Looking good big man, brilliant team CVF effort [8D]
 
hi martin :) there is a sinister reason for this, woolfys going 5 link [8D]

"you were only supposed to blow the bloody doors off"
 
thats right guys woolfys going race car handleing with new suspension.well if im going to put that big straight six cylinder triumph 2.5s engine into the old girl im gonna have to up grade as much as i can.yeeeehaaaaa.:p;)
 
there will be more pics i sent them to studio today to post but i dont think shes seen them yet.(check your computer woman).only joking studio.;)
 
woolfy you need to get some flap discs/sanding discs for your grinder as they are less aggresive for doing the dressing up of welds that show.;)

"you were only supposed to blow the bloody doors off"
 
ok tim will do.i will get some during the week. you should be able to see the the rest of the pics of the party tomorrow i hope,as soon as studio posts them for me. listen dont forget to let me know how much i will owe you for the new petrol tank sometime during the week,and i will send you a cheque down as soon as i have the new sender unit from speedys.chris has my number if you would rather call me over the phone,i will just make sure im standing next to a seat somewhere when you tell me the news.only joking mate ha ha.;)[:0]
 
Calm down dear, woman did check her computer once she got back from playing around in commer (once you have yours finished, you will understand these things have to be done:)) - had some catching up to do so sorry for delays - one or two photos below....
1315197432_14006ed61f_b.jpg

1314311659_34baee0b95_b.jpg

1315198790_4725b564e0_b.jpg

1314316191_29a393ad8b_b.jpg

1315202128_02c6f82d35_b.jpg

this one open for caption competion
1314319251_69afe0af0f_b.jpg

1315204502_ce8a2a47f2_b.jpg

true artistry[^]
1314321853_ae6870d38f_b.jpg

1314323331_4e76a82ff1_b.jpg

1315208746_d940730a8d_b.jpg

1314326027_36a67b70e8_b.jpg

who was that masked crusader?
1314327249_b1c2ef9787_b.jpg

1315212230_fa4f453dd7_b.jpg

1315213786_c8fabe2417_b.jpg

1314330735_787ec7bf72_b.jpg

1314331935_6287b158e8_b.jpg

1314332911_ba20ab01f5_b.jpg


That looked like fun, work looks great - woolfys' weld-in:D
 
No wonder woolfy was pleased, looks like everyone worked their socks off. Most impressed with the welding old chap [^], I've been doing it for years and don't get results as good as that [V]
 
i would love to take all the fame and glory but im too honest, most of the welding was done by tim and nath,i just had alittle play with it,(the welding gun that is before anyone jumps to conclusions).but i did do ok for my first time i think,not so sure about when i had a go on my own though after they had all gone home ,i will send studio the pics tomorrow to see what you think.thanks again studio i dont know what id do with out you and panky,cheers guys.:p;)
 
lurvely jubbly..nice to see the van coming together again Woolfy..you found yerself a nice engine to squueze in there yet?

:)
 
not got one yet but i know where there are two or three triumph 2.5 s engines knocking around so it wont be long.;)
 
You must log in or register to reply here.
Back
Top