Sorting Jim

He Past:D a couple of advisories 1 Fog light not working & slight corrosion rear corner :confused: so he showed me and it is the old outer corner of the van which is not needed on a coach built, but may be I should of taken it off completely I will for next year.:D
 
Well you would that Jim passing his MOT that we would be using him, But no as soon as I got him home from the MOT station he was having more cosmetic work.

1.jpg

2.jpg

Time to start work on his rear end.

3.jpg

so off with the back door, Lights out and rear step removed.

4.jpg

Needs a quick rub down and painting next week end :)
 
andrew said:
Well done on your mot,nice to see your working on your van aswell. What paint are you using?
Click to expand...

Thanks Andrew I am using 2 pack paint its a bit easier to use then cellulose, but I have to have 2 compressors going at the same time, one for the spray gun and one for the full face mast.
 
Started the day with the number plate housing, it is made from fiberglass and had been painted with stone chip :eek:
101.jpg
so I spent hours sanding it down and gave it a coat of primer.

102.jpg

Quite a lot of work to do on this small panel it would have been quicker to make a new one.

103.jpg

Then I started sanding the back of Jim down the lower sections had also been painted with stone chip :rolleyes:
104.jpg

Fitted the number plate housing back on and added a little more filler.

104a.jpg

a little more rubbing down then a coat of primer.

105.jpg

still a little prep work and then the top coat next weekend :D.
Next the rear door.

106.jpg

This needs a little work on the badly repaired damage but nothing too serious.
 
You must log in or register to reply here.
Back
Top