its a JBM pre war, one of six made and the only one left [:0] my job is welding up all the holes and cracks
note the ratsport component on there jules
"you were only supposed to blow the bloody SLIDING doors off no.3"
something completely different
- Thread starter commeracer
- Start date
its a JBM pre war, one of six made and the only one left [:0] my job is welding up all the holes and cracks
note the ratsport component on there jules
"you were only supposed to blow the bloody SLIDING doors off no.3"
WOW!!!
that is very gorgeous, looks a bit like this...[:0]
Bessie - four star commerdation
that is very gorgeous, looks a bit like this...[:0]
Bessie - four star commerdation
dead right trev, its a ford flathead v8, original fitment
"you were only supposed to blow the bloody SLIDING doors off no.3"
"you were only supposed to blow the bloody SLIDING doors off no.3"
note the ratsport component on there jules
Its beautiful, can I copy the pic
On a different note, if you dont mind my hijacking your thread: Will this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120348625236&ssPageName=STRK:MEWA:IT&ih=002
fit my 390 62 Galaxie..[?]
What do you think, I dont know much about the interchangeability of Deerborn mills.
Cheers
Jules
RatSport www.ratsport.co.uk
Its beautiful, can I copy the pic
On a different note, if you dont mind my hijacking your thread: Will this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120348625236&ssPageName=STRK:MEWA:IT&ih=002
fit my 390 62 Galaxie..[?]
What do you think, I dont know much about the interchangeability of Deerborn mills.
Cheers
Jules
RatSport www.ratsport.co.uk
thought you might like that jules, by all means copy the pics [^]
that 302 should fit a treat,as its a smallblock it will go in easy [8D]
"you were only supposed to blow the bloody SLIDING doors off no.3"
that 302 should fit a treat,as its a smallblock it will go in easy
[8D]"you were only supposed to blow the bloody SLIDING doors off no.3"
Isnt my 390 a big block ?
Cheers
Jules
RatSport www.ratsport.co.uk
Cheers
Jules
RatSport www.ratsport.co.uk
yes it is jules, which means you have enough room under there for about 3 smallblocks
"you were only supposed to blow the bloody SLIDING doors off no.3"
"you were only supposed to blow the bloody SLIDING doors off no.3"
I was kinda hoping (dreaming) that you would tell me that motor would fit straight on the bellhousing, engine mounts, rad hoses, and is the best motor design ever out of Deerborn :I
Cheers
Jules
RatSport www.ratsport.co.uk
Cheers
Jules
RatSport www.ratsport.co.uk
sorry to let you down there jules :I
big blocks have a different stud pattern for the bellhousing to smallblocks so the boxes dont interchange
the best of the b/blocks is the 427 side oiler, but they are very rare and cost zillions [:0]
my personal favourite is the 1970-73 351 cleveland,(think shelby gt350) which is a "middle block" basically a s/block with the timing cover extension cast in the block.originally designed as a NASCAR motor, and the modern version is still based on it.used to know a bloke that had one in a cobra, 600 bhp n/a then over 1000 with the nos ran 10 sec on street tyres smoking then all the way [8D]
"you were only supposed to blow the bloody SLIDING doors off no.3"
big blocks have a different stud pattern for the bellhousing to smallblocks so the boxes dont interchange
the best of the b/blocks is the 427 side oiler, but they are very rare and cost zillions [:0]
my personal favourite is the 1970-73 351 cleveland,(think shelby gt350) which is a "middle block" basically a s/block with the timing cover extension cast in the block.originally designed as a NASCAR motor, and the modern version is still based on it
.used to know a bloke that had one in a cobra, 600 bhp n/a then over 1000 with the nos ran 10 sec on street tyres smoking then all the way [8D]"you were only supposed to blow the bloody SLIDING doors off no.3"