Highwayman bench seat confusion
- Thread starter Terence
- Start date
BC Sunshine
Active Member
pimpwagon.... bwahahahahaha!!That upholstery is pretty luscious.
Could we please see some photos that show the back? I'm very intrigued; my Evangeline has single seats.
Looks a bit like mine too I will post pics of the one in the pa with the v8 admins old ride....The above pic is of a rear bench from a dormobile very similar but makes up part of the bed in the back of a dormobile.
Terence
Active Member
Bench seat brackets/fixing
1st pic bracket is bolted through wheel arch with st/st bolts with type c wshr behind + nylocs
2nd pic is side bracket which bolts through upright frame with contoured spacer so doesn't crush tubing with nylocs it also drops down into cut out & stops back falling forwards & backwards, it has to be unbolted to gain access to engine ie: remove or it's very tight to engine
3rd pic spring loaded pin locks down bottom frame to bracket "next pic"
4th pic L-bar bracket again bolted through tops of wheel arches this stops any sideway movement on bottom seat frame & locks down at back with spring loaded pins.
Hope this helps anyone
1st pic bracket is bolted through wheel arch with st/st bolts with type c wshr behind + nylocs
2nd pic is side bracket which bolts through upright frame with contoured spacer so doesn't crush tubing with nylocs it also drops down into cut out & stops back falling forwards & backwards, it has to be unbolted to gain access to engine ie: remove or it's very tight to engine
3rd pic spring loaded pin locks down bottom frame to bracket "next pic"
4th pic L-bar bracket again bolted through tops of wheel arches this stops any sideway movement on bottom seat frame & locks down at back with spring loaded pins.
Hope this helps anyone
Attachments
S0updragon
Well-Known Member
Neat and tidy
Just like mine!