Fuel Tanks

i think you may be right panky, i am already considering a second batch [:0]

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
That might just be around the time when I'm getting fed up with snakeskin [xx(]

'Harvey the RV'
 
i have some nice perforated mesh for making your tank panky :D

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
It'll match all me other little perforations - a continuing theme :I

'Harvey the RV'
 
I'm starting to get paranoid about snakeskin too so I may be in the market when we're back on the road!

Rupert

www.littleyellowcar.co.uk
 
well the material turned up, so i spent today making the spouts for the filler hose :)
3203666563_6978fdbb8f_o.jpg


"you were only supposed to blow the bloody SLIDING doors off no.3"
 
I feel like I need to throw a ball at them :I
He can turn as well as weld - is there no end to the mans talents [^]
'Harvey the RV'
 
yes there is, afraid i cant fart and chew gum at the same time :D

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
i am working on it kes, and chris has promised to give me lessons :D;)

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
This sounds like an interesting challenge! :D

Could raise a few eyebrows at the next Commer meet. :I[}:)][xx(]

'It's not a proper slider'
 
latest news is all those super spouts are now welded on [^] the flat strip for the mounts will be with me in a week or so.unfortunately i am struggling to get the time to do them.
hang in there folks ;)

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
well the angle for the lugs turned up today, hopefully the flat for the mounts will be here by the friday, so this weekend is booked for the job. with a bit of luck i might even nearly finish them :)

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
well, as the flat bar only turned up today [:(!] not much progress was made :( so its full steam ahead this coming weekend [^]

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
much progress was made this w/end :p

3282057501_c43453547b_o.jpg


one in the jig :)note the custard cream, an important part of the operation, i find they have more structural integrity than chunky kit kats ;)

3282057507_a646e5a191_o.jpg

5 awaiting fuel sender fitment and final leak testing, closely guarded by george :p

3282057511_75febb2e44_o.jpg

looking down the filler neck, this was done like this as a "anti petrol thieving device". i must apologise for the state of the drilling, it was my glamourous assistant who did it amidst cries of "whats up with this f*******g drill, its blunt and keeps falling out".
thats because you are using it in reverse dear [:0]:I

"you were only supposed to blow the bloody SLIDING doors off"
 
Back
Top