Frodo

I think it looks great without the bumpers, just need to be extra carefull i guess;-) Nice paint job too. Why did you blank of the air intake though?

Album003-1.jpg


My name is Scott, not Comm-Don!
 
quote:
Originally posted by Comm - Don

Why did you blank of the air intake though?




Because I took the heater matrix out. I am going to build a new heater this winter, using a matrix from a modern car and some pc fans to blow it around - I won't need the intake anymore.

The air intake to the engine is still there - what looks like a flat sheet in the picture is actually some ali perf.

3902743363_3a8fe715e6.jpg


3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
You know what Chris, i never looked at it like that before but you are sooooooo right:-0 kind of like that saying about the glass being half full or half empty HAHA.

Album003-1.jpg


My name is Scott, not Comm-Don!
 
Oh i see;-) I will be keeping a very close eye on how you do this mate cos mine is shot to bits too and am interested in doing something similar. Pc fans, what a great idea. What will you do, just put the grille back on as a dummy?

Album003-1.jpg


My name is Scott, not Comm-Don!
 
I may replace the grille with a "letterbox" to allow some air through the cab in the summer, but keep out the rain in the winter

3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
I'm liking the lateral thinking on the airbox, ours is almost non-existent too :(

quote:
Paint by Rustoleum

The results look very good - you must be pleased. As our own restoration ambitions exceed our budget, we're seriously looking at this route too. Did you use the roller or spray can method ?

Good luck with the MOT [8D]

th_Commer_carpark.jpg

Commer 'Hi Tor' by TorCars
 
quote:
Originally posted by Paul Goldsmith

Did you use the roller or spray can method ?



We used spraycans, it takes about 3 - 4 cans to give the van a single coat. The last coat was not very good (I was so worried about runs, that I went over too lightly) so there is a bit more work to be done there. But, for less than £100 we got a reasonable finish. When I get a chance I will write up a more comprehensive explanation of what we did.

3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
remember seeing him at the New Forest... Wouldn't recognise him at all now... well done... Good Luck with Mot too :D

Cazz...Is just Commer mad, and talks a load of nonsense
 
looks very good mate i love it. i think you have done very well especially if its your first attempt as well. just one thing though how or what exactly did you do on the lower rear corner in the end, as last time it looked like a suit of armour,and you were unsure what to do with it.:p[?]
 
Hiya! I just kept welding bits of metal to it until it was pretty much solid, and then we went over it with filler.

3904560437_6631841807.jpg


3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
quote:
Originally posted by cazz enigma

remember seeing him at the New Forest... Wouldn't recognise him at all now... well done... Good Luck with Mot too :D



Ah yes! For those of you who don't remember, this is what he looked like when we started....
2974668819_9a7dec940e.jpg


3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
Thanks for the response re. cans - I might yet convince Sally that Rustoleum is the way forward for us. Better to spend our money on getting us solid in the first place.


th_Commer_carpark.jpg

Commer 'Hi Tor' by TorCars
 
Ok, it's been a busy week!

MOT was booked for last Wednesday, but didn't happen until Thursday am. I Got the phone call I had been dreading/expecting "It's failed". Ho hum! So we popped over to see the garage and have a chat. Turns out, it only failed on a seizing rear brake and a failing front shock absorber, so Skate said to the man "If we could get the parts to you today, would you give it a go to get it finished tomorrow?" To which he replied that he thought he had a fair chance.

So, off we popped to Brighton to visit the magnificant "Speedy Spares", we were back at the garage by 3.00, by which time he already was taking the brake cylinder off, ready to try the repair kit. We left him to it and came home. The next morning at 0830 I got a phone call telling me that Frodo was ready to go!

Off we dashed, picked up Frodo, got him back home packed him up and were on our way to the "End of the Road" Festival by 1.00!

To those of you who don't know, at the start of the summer, when we bought our festival tickets, we also bought a campervan ticket - I jokingly said to Skate "that gives us a must do by date" As the year wore on, and I spent more and more time abroad for work, this date looked increasingly unlikey, but with every spare evening and every spare weekend for as long as I can remember spent in the barn, we made it!!!!!

Couldn't have been much closer though!!

The festival was great, Frodo ran like a dream (if you can ignore the diff that screamed anywhere above 35-40mph, and the oil leak from the front of the engine (750ml in about 100 miles)) The only downside was Johns V8 van not making the last 8 miles and having to go home on a tow truck. After a week or so of not doing anything van related, we are going to make a start on the interior.

It's great to be Commering again!!!

3897579513_b1fb5b908a_o.gif

FRODO LUVS YA!
 
Excellent [8D] shame about the v8 but at least Jon is having a well earnt rest. Aren't barns wonderful :p

Sybhil & no1
 
Well done guys - you'll have to invite me in again to view the new look interior :)
Frodo looks GREAT:D[8D]

Harvey the RV
 
FRODO LIVES!

After a rather extended rest period (almost two years in all) Frodo passed his MOT today at the second attempt!

The garage had a nightmare sorting out the emissions, had to take apart and clean the carb, adjust the timing from +40 to -8 (or something of that order!)and various other things. There are a couple of issues that were picked up that need sorting out.

Other fail points were a non functioning nearside rear indicator, which has since stopped working again, clean up of the front brakes as the handbrake wasn't holding, and headlight alignment, so all in all, pretty good!

Now work can start on the interior again, and hopefully he will be ready for his first proper outing at the end of June, when we go to a festival that is fortunately only about 15 miles from here! I have to get the rest of the cupboards made, install the KICK ASS led lighting system, and make the bed (from wood, not just putting the sheets on!)

But first of all, hopefully go out in mini Commervoy with admin and Liza at the weekend!

HAPPY DAYS![8D]


3897579513_b1fb5b908a_o.gif
 
Back
Top