Really sorry but can’t find them! Possibly 7/16 unf.
Betty the Commer Pizza Truck Project.
- Thread starter Leerec
- Start date
Looking around this is probably what you’re after, just hopefully it’d be long enough. I’d assume same fittings as the Commer as likely uses the same or similar parts. Reasonable price too.
He probably makes them so if contact Arrow5spares and know the length he’ll probably let you know this size or even knock one up.
Good Luck
https://ebay.us/m/6lDle5
He probably makes them so if contact Arrow5spares and know the length he’ll probably let you know this size or even knock one up.
Good Luck
https://ebay.us/m/6lDle5
Last edited:
Thanks for this and no worries about not being able to find them, I’ll get in touch with this chap once I’ve measured it up
Right so I’m back with another stupid question, I’ve finally managed to get the line out from the master to the slave, I’ve had to take the slave off again to do this and I was wondering will I need to get a new Rubber bit that goes on the end ? as it’s only been on a few days and not been driven on as I noticed the leak from the old line.
The bit I mean is the bit on the right of the slave in this image that the metal pole thing goes into which comes out the gearbox. Clearly I’m good with mechanical terms
The bit I mean is the bit on the right of the slave in this image that the metal pole thing goes into which comes out the gearbox. Clearly I’m good with mechanical terms
Attachments
Ah in that case I’ll be fine then, as my leak was on the other end of the line. Once I’ve got the new line it should just all work fine. Contacted the person Jim recommended so hopefully he can sort something out for me.
If not I’ll make my own I suppose if I get the right tools for it