The thing about commers is......

hi there kes your a very lucky girl today as i looked through my garage and guess what i found? some repair section for you about a metre or two long, would you like it still if so email me and we will sort it out.:p;)
 
proposals of marriage and the offer to bear your cubs Woolfy!:p:p:p[:X]:D (although it sounds like Mrs Woolfy far too lovely for the need to take me up on this![:X]:)):)(and I might have to clear it with Glyn first:I)

Thanks for lovely messages, it's nice to know if all else fails I can gain employment welding Chinese motorbikes[8D]

Some of the old college nollege coming back to me - I know what you mean about scary Chris, the safety lesson our lecturer gave us was so frightening it took an hour for anyone to be brave enough to be first to try it when we got into workshop[:0] It is the fire thing that was the main factor in putting me off trying it on my own before - saw an MG go up in the classic restoration place I did my college work experience in. They got it put out before any major damage but still some impressive flameage going on - I might be a bit of a pyromaniac but don't quite fancy that;)

Will try and get some pics later and an email sorted for the gorgeous superb wonderful handsome Woolfy (does it sound too much like I'm going for discount:D[?]) thanks for finding those - much appreciated:)



Bessie - four star commerdation
 
martin did you mean kes? with her knowledge :D[}:)]:D lol
I was the first girl at my school to be allowed to take up "boys" lessons needless to say took up
woodwork,metalwork,TD,& step any one know what STEP stands for ?
my excuse for not welding was it causes my migraines :I
but have done a fair amount of fire watch & put out a couple too :)

"SYBHIL" & N0.1
 
and here you all are harking on about a little spelling mistake that i made in the quizz . jusy look at some of these sloppy mistakes, i should give you all a detention and make you write the wrong words a hundred times or more. ha ha:p;)
 
kes, you can achieve this sort of standard, the technique is to close your eyes, stand on your head,in the dark,hold the the torch between your bum cheeks and have an assistant shake the work [:0][:eek:)]:D

2874437447_7ea6508985_o.jpg

2874437455_214d656499_o.jpg


"you were only supposed to blow the bloody SLIDING doors off no.3"
 
quote:
Originally posted by commeracer

technique is to close your eyes, stand on your head,in the dark,hold the the torch between your bum cheeks and have an assistant shake the work



Well that's how our lecturer told us how to do it[:0]

I'll have you know there is nothing rong with my reading, riting & rithmatic - I'll leave it to you to decide about the metal bending & welding though...
http://i209.photobucket.com/albums/bb50/studiocommer/DSC_00077.jpg
http://i209.photobucket.com/albums/bb50/studiocommer/DSC_00073.jpg
http://i209.photobucket.com/albums/bb50/studiocommer/DSC_00075.jpg
http://i209.photobucket.com/albums/bb50/studiocommer/DSC_00076.jpg

Still plenty to finish off and tidy up and then on to next layer then:)

Bessie - four star commerdation
 
wow go girl :pdid you really do it [?] or are you fibbing [^]I know you did really [:X] Bessie looks loads better than last time.I wish I could be brave enough to cut some rust out [8D]ps hope the weater stays nice for you,just think get it all done now & you can enjoy the spring lay ins :p

"SYBHIL" & N0.1
 
Thanks Misses - hoping if weather still good tomorrow will be able to have more of a blitz, everything in pics is mine, some of the o.k. looking bits need to come off as didn't take properly - am half expecting the whole lot to ping off the first bump I hit:I but glad it's taking some sort of shape. Getting far too domesticated now, need to get back out and enjoy these lovely indian summer evenings soon.

P.S. Snap:) - I was the first girl in our school to be allowed to do woodwork & metalwork[:X] & I have absolutely no idea what STEP stands for[?]

Bessie - four star commerdation
 
Crikey Kes[:0] that is better than any welding I've ever done:I Mine really does resemble the bike frame Tims got [xx(]

'Harvey the RV'
 
that is rather good. Mine tends to need the "unwelder" to be applied afterwards...

I used to really enjoy needlework at school, I was quite good at it too!

Rupert

www.littleyellowcar.co.uk
 
lol handy for fixing lace curtains(see mr panky I have been paying attention! am I fully qualified yet [?])

"SYBHIL" & N0.1
 
thanks folks - will be cracking open the 'unwelder' myself in a couple of places as aim a little off, and sorting out where it's burnt through - hoping to get more practice in before reaching the outer bodywork, don't want to wreck Woolfies lovely metalwork[8)]

Bessie - four star commerdation
 
sorry kes, you,ve failed, much to good to be a chinese frame welder :D

"you were only supposed to blow the bloody SLIDING doors off no.3"
 
Back
Top