Temperature.

The only difference I can see between your diagram and the one in the PB manual is that yours shows the voltage stabiliser having its own earth connection. The version I have does not show this but if the stabiliser is normally secured to an earthed mounting point then it must be. Here is the wiring diagram for the PB, see if you come to the same conclusion.

WiringDiagram1.jpg
 
quote:
Originally posted by Panky

The only difference I can see between your diagram and the one in the PB manual is that yours shows the voltage stabiliser having its own earth connection. The version I have does not show this but if the stabiliser is normally secured to an earthed mounting point then it must be. Here is the wiring diagram for the PB, see if you come to the same conclusion.



Hi & Thanks again for your reply.

Indeed the original stabiliser is secured to an earthed mounting, so that should be ok.
Well... I guess there is only one way to find out if it works... I'm gonna try it this weekend I think.
For safety I will use a 1A fuse, that should me enough.

Keep you posted !

Check www.commerwel.nl
 
You must log in or register to reply here.
Back
Top