Reversing with overdrive?

Hi, i took my commer for a service this morning. While i was driving in the rain i started to think. What would happen if i reversed with overdrive still on? Would it make a terrible noise? I have put a sticker on the dash to remind me.
 
You would certainly know about it if you did, the protesting from the o/d is severe. Something you only do once, and realise pretty swiftly :)

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Is your inhibitor switch not working then?

BazRockscropped.jpg
Spare a Commer Guv?
If I told you I was a pathological liar, would you believe me?
 
It's a very bad thing - overdrive kaputt[xx(]
Like Baz says there should be an inhibitor switch, if there isn't it's easy to fit one. I wouldn't rely on a sticker - a switch is essential.

th_DCP_9909.jpg

Two's company
 
I have had a look and can`t find a inhibitor switch, where would it be and if my commer hasn`t got one how easy is it to fit?
 
The switch is screwed into the side of the gearbox, near the top on the drivers side. If there isn't a switch there will be a blanking plug in it's place, simply unscrew it - screw in the switch and attach the wire that normally goes to the solenoid to one terminal - then run a new wire from the other terminal to the solenoid. This will prevent overdrive being engaged in 1st, 2nd and reverse.

th_DCP_9909.jpg

Two's company
 
Here's a pic of the switch in position, the one on the right is the inhibitor, the one on the left is for a reversing light connection - they are identical.

DCP_8244.jpg


th_DCP_9909.jpg

Two's company
 
Back
Top