Rear door cupboards

[Slyone00]

Hi all,
Currently restoring a 1969 wanderer.
Got it running well.
It came with no interior so lots to start on once the welding is finished.
We are replacing the old rear doors with a pair of newer ones that I have rubbed down treated and painted up.
We’d like to build the cupboards that go on the rear doors but have no real plan or dimensions. Does anybody own a plan or are able to provide dimensions for these please.

TIA
Dave

 

[Panky]

Hi Dave,
I can get you some dimensions of the Auto-Sleeper versions which are a little different to the Wanderer type. Give me some time and I'll sort it out for you.
If you need dimensions for the whole interior there's a basic set of plans on the home page that might be of interest, again based on the Auto-Sleeper layout.
Scroll down to the bottom of the page. I cocked up the dimensions here and there unfortunately but the diagrams are pretty much to scale so the ones that look a bit strange should have a decimal point in there somewhere or an added zero

Downloads

Documents for the comemr including free Commer Manual

www.commervanfan.co.uk

 

[Panky]

OK, the cupboards are 16 1/2" wide and 21"long, 3" deep from cupboard face to the van door at the top
The carcass is made from 7/8" approx thick timber with the face and door from 1/2" veneered ply. The door fits against the inside of the frame but is set to one side to fit around the wardrobe in this case.

Hope this helps