RANS ALIVE AND WELL
- Thread starter 45rpm
- Start date
hi folks - haven't heard from you for ages - would love a Ran update if you're passing
Was telling Glyns' daughter about the Mcfly shoot last night as she's a big fan and she would love to see some more pics of the vid shoot if you managed to track some down (as would I)
Hope all well - forum has a bit of a hole in it without a Ran
Bessie - four star commerdation
Was telling Glyns' daughter about the Mcfly shoot last night as she's a big fan and she would love to see some more pics of the vid shoot if you managed to track some down (as would I
)Hope all well - forum has a bit of a hole in it without a Ran
Bessie - four star commerdation
post pic's & news else pass me the tissues
"SYBHIL" & N0.1
"SYBHIL" & N0.1
Im back.... been busy with work split with my lady moved out of flat etc etc etc.... but it now means i only have one lady in my life it just a shame she dosnt have breasts, or bumpers... ive got loads of pics to upload so hee are a few. we decided to have a fry up in her the other morning just for fun out side my flat, it was mint. plus on my road there are about seven other classic cars and we have started to all have a work on our cars vans etc in a line. There all Cortinas but they like there cider so alls good... here are some pics
oohh nooo the crabs broken [:0]
"you were only supposed to blow the bloody SLIDING doors off no.3"
"you were only supposed to blow the bloody SLIDING doors off no.3"
should all commers have a crab....
... I've just checked outside and Jessica hasn't got one! Will she fail her MOT?![:0]
that corner looks a little woolly to me, go on - zap it with a wire brush, it could be you just need a little rectangle of steel welding in (I'm an optomist you see...)
Rupert
www.littleyellowcar.co.uk
... I've just checked outside and Jessica hasn't got one! Will she fail her MOT?![:0]
that corner looks a little woolly to me, go on - zap it with a wire brush, it could be you just need a little rectangle of steel welding in (I'm an optomist you see...)
Rupert
www.littleyellowcar.co.uk
rolfl,,,umm woolfy I do hope you mean you have some of those panels :I
god mat that brings back a scary couple of seconds in Ran when a lorry got closer & closer & for a second the driver appeared to fall asleep [:0]didn't feel any thing I just new contact had been made
The front windscreen is no place for a crab!
DAD better of in a colision bumper less apparently less damage [8D]
Sybhil hasn't got any,more miles to the gallon too & Matt is less likely to take the idiot who parked to close to Ran,bumper off when trying to get out of the parking space
Hope things are going ok now matt Ran looks great as always [:X]
"SYBHIL" & N0.1
god mat that brings back a scary couple of seconds in Ran when a lorry got closer & closer & for a second the driver appeared to fall asleep [:0]didn't feel any thing I just new contact had been made
The front windscreen is no place for a crab!
DAD better of in a colision bumper less apparently less damage [8D]
Sybhil hasn't got any,more miles to the gallon too & Matt is less likely to take the idiot who parked to close to Ran,bumper off when trying to get out of the parking space
Hope things are going ok now matt Ran looks great as always [:X]
"SYBHIL" & N0.1
Yey! great to hear from you & lovely to see some Ran pics - mmmmmmmm bacon
May not have breasts but certainly not short of nipples:I[}]
Are they bumpers then? I thought they were the audio parking system:I poor corner looking a little naughty - don't want to cause any worry but might be worth checking end of chassis behind corner and inner corner in case rusting from inside out (was what caused Bessies' corners to develop holes) will keep everything crossed that Ran O.K. and just needs a little patching[8)]
Bessie - four star commerdation
May not have breasts but certainly not short of nipples:I
[}]Are they bumpers then? I thought they were the audio parking system:I
poor corner looking a little naughty - don't want to cause any worry but might be worth checking end of chassis behind corner and inner corner in case rusting from inside out (was what caused Bessies' corners to develop holes) will keep everything crossed that Ran O.K. and just needs a little patching[8)]Bessie - four star commerdation
bushes with metal in dont count as a bump... thats a fact.
Took the step off which looks loads better now, thinking about getting a stair lift for the old man, il see what he thinks...
i said a while back about the fuel pipe pissing fuel everywere so i took it off today hoping it was just a case of new clips and pipe.
I got all the new bits for the pricey amount of three pounds. but i affraid its going to happen again as the adaptor in the top is too big for the pipe but fine at the bottom adaptor, so surely its just going to break through the pipe again at some point. any ideas?
Took the step off which looks loads better now, thinking about getting a stair lift for the old man, il see what he thinks...
i said a while back about the fuel pipe pissing fuel everywere so i took it off today hoping it was just a case of new clips and pipe.
I got all the new bits for the pricey amount of three pounds. but i affraid its going to happen again as the adaptor in the top is too big for the pipe but fine at the bottom adaptor, so surely its just going to break through the pipe again at some point. any ideas?
Which pipe is it too fat for, is it jointed somewhere. If it is the piece that runs from the pump to the carb maybe you just need smaller diameter pipe all the way through :I
Just looked at previous page :I Does the pipe run all the way back to the pump?
'Harvey the RV'
Just looked at previous page :I Does the pipe run all the way back to the pump?
'Harvey the RV'
if its just that peice of metal that your trying to get into the end of the pipe why dont you try heating the rubber pipe up a bit so it goes nice and soft and plyable then slap a bit of grease on the end of the metal and push it in. once the pipe has cooled down it should be a tight fit around the metal. thats what i would try.
What's the best way to heat the pipe? Hot water?