pb roof

[carbreeze]

having van resprayed is there an easy way to remove the roof as its pot rivited any help would be grateful

 

[martin maltas]

What conversion is it [?]

http://www.commervanspares.co.uk/

http://www.yorkshireclassiccampers.co.uk/

 

[carbreeze]

not to sure about that one martin how can you tell omg im such a blonde lol

 

[martin maltas]

Can you post a pic of the roof

http://www.commervanspares.co.uk/

http://www.yorkshireclassiccampers.co.uk/

 

[Panky]

If you can put some pics on we could identify the conversion
Or you could send them to me and I will post them for you

john _ [email protected]

'Harvey the RV'

 

[carbreeze]

in the lost and found forum its the one titled "what happened to this one lol hope this helps,any help appreciated, will post some pictures tomorrow

 

[Panky]

So sorry - still can't tell you what conversion it is, maybe more pics will help :I Especially around the roof area.

'Harvey the RV'

 

[carbreeze]

thanks for looking panky will tell hubby to take piccys tomorrow hope youll like the changes weve made

 

[admin]

rivets are easy enough to drill out and re-apply surely?

 

[Panky]

No matter what the conversion - or roof - it would be easier to leave the pop-top where it is and mask off as required, no rivets to drill out:I

'Harvey the RV'

 

[martin maltas]

Are you spraying the van roof or the pop top. On most conversions there is a wooden frame screwed to the van roof from underneath. You have to remove the headlining to get to the screws.
On Autosleepers, the pop top is fastened to the frame with screws from the top. These invariably brake off and have to be re-drilled.
I only remove roofs if I'm doing a complete resto or scrapping. Panky's suggestion of masking is easier. Daisy has just had a respray and we lifted the top and masked it all


http://www.commervanspares.co.uk/

http://www.yorkshireclassiccampers.co.uk/