More help please...

R

Razor7

0
As mentioned in other thread... brake and clutch system all reading for filling and bleeding.

So, is there any particular order to bleed the brakes? - assume furthest wheel first? - please confirm. And the clutch, matser first then slave?

Also, I have a towbar I want to fit (witter) does anyone have a basic idea of its fitting? - or is it obvious? I have all the metal sections just wondered if anyone had any a photo of the underneath when fitted they could post for me please?

Many thanks, Ray
 
yes, start with the furthest one first, NSR,OSR,NSF,OSF.
clutch is just bled at the slave cylinder
make sure the towbar bolts to several strong places to spread the load :)

"you were only supposed to blow the bloody SLIDING doors off"
 
3716258301_b33efd3f5c_o.jpg


3716258307_f2c1c64980_o.jpg


"you were only supposed to blow the bloody SLIDING doors off"
 
Many thanks CR..That was quick!

Thanks for the snaps...very useful. Will go and have a look how mine bolts on, looks pretty similar. The bolts are with it so should be ok.
Cheers Ray
 
You must log in or register to reply here.
Back
Top