Just want to check.....................

commeracer

commeracer

0
............with the H&S man, that the new switch for my saw conforms to the latest regulations ;)

5543863771_ca428843ac_o.jpg


4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
From the PUWER Regs 1998


Stop controls

15.—(1) Every employer shall ensure that, where appropriate, work equipment is provided with one or more readily accessible controls the operation of which will bring the work equipment to a safe condition in a safe manner.

(2) Any control required by paragraph (1) shall bring the work equipment to a complete stop where necessary for reasons of health and safety.

(3) Any control required by paragraph (1) shall, if necessary for reasons of health and safety, switch off all sources of energy after stopping the functioning of the work equipment.

(4) Any control required by paragraph (1) shall operate in priority to any control which starts or changes the operating conditions of the work equipment.

I recon you are fully compliant:)

th_DCP_9918.jpg

Summer's Coming.....
Trust me
 
Good god i would not want to work with any of you lot just steaming into dangerous workplaces with possibly dangerous equipment! not one of you asked if the new switch was hard or soft wood!!!!:D:D:D[}:)]

I'd rather have a bottle in front of me than a frontal labottomy!
 
No need to worry Nath, its pine, but only because i couldn,t afford the walnut version :D

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
rough sawn or machine cut, there are regulations in place for reason you know! how inconvenient would a splinter be if you had just cut the other arm off!!:D:D:D:D:D:D:D

I'd rather have a bottle in front of me than a frontal labottomy!
 
Hmmmm i see your point, i shall get the french polish out :D

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
You must log in or register to reply here.
Back
Top