Heater mounting wanted..
- Thread starter paulfordy
- Start date
The one you threw away from the minibus was better than that[
)]
)]If i feel so inclined i may take mine off the van and take a photo of it. Mine was almost as rusty until the fabrication dept at work got to work on it.lots of plating was required but it came up a treat, they welded on a new down pipe, fixed the springs, added a bit of foam padding and even painted it black for me.
Almost like new.
Almost like new.
Only applicable to vans in 'the back of the garage'.[)]
)]
No, the radiation from the overheating engine kept me warm [V], but me new motor will solve that . In one of the 'shake down runs' to Anglesey I came back with the heater full on in high summer in an attempt to run the engine cooler, it worked. I think I lost about half a stone in sweat [xx(]
. In one of the 'shake down runs' to Anglesey I came back with the heater full on in high summer in an attempt to run the engine cooler, it worked. I think I lost about half a stone in sweat [xx(]My heater box was the same so I have decided to use a 12v Heater I found ebay attached to the the matrix housing. Im fitting it where the matrix was and putting a ali surround on to direct the air into the box. Still in progress at the mo it's a bit fiddley. But the plan is it'll blow to the screen or if you open the flaps it may produce some gentle warming to the feet.