Git orf o moi laaaaaaaand

oops his secrets out :D

Sybhil
4440738170_a18ab2bd4e_o.jpg
 
where did you aquire the sheet metal folder from tim, ive been looking at getting on of these for ages , but they all seem very expensive even on ebay.£500.00 plus most of them.:(

th_HPIM1509.jpg

Big Bad Woolf
 
It was lurking on ebay for £750 :) and its an F J Edwards too :p as you say woolfy, they are not cheap [xx(]


4512057915_d4db8c4f01_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Its a struggle to find one like that for much less than 1500-2000, it will bend 5ft of 3mm [:0]


4512057915_d4db8c4f01_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
More progress today :p got this fantastic old Herbert drill, made the stand today, plugged it in and smoke billowed out the motor and it died [xx(]

4584308317_246a52584d_o.jpg



4512057915_d4db8c4f01_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
quote:
Panky Posted - 06 May 2010 : 20:31:27
--------------------------------------------------------------------------------
Looks a bit of a hair snatcher




Not a problem for some of us! ;)

avatar_23306.gif


'I intend to live forever - so far, so good'
 
Just old machinery Pete :) if its old, its quality, if its new........................well :I


4512057915_d4db8c4f01_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Back
Top