Dozers photos

had a letter today to say that it will b about 4 months till my op .. so should c a few of you before that .. thanks kes support is and will b greatly appreciated :) .. what the betting i get a male nurses 4 my bed baths lol
 
Bed bath! with your new metalwork fitted they'll probably just get the pressure washer out[:0];) - hope the upgraded suspension works well for you:)

Bessie - four star commerdation
 
no your not seeing things the vans back on ebay ,, along with the dodge .. both under hotrod .....the best laid plans eh .. put so money in the kittie 4 when im laid up ..
 
Sorry for the stupid questions Dozer :I thought I would start the ball rolling :D[}:)]:D but if you fancy a deal we could talk [}:)]

"RAN"the van & N0.1
 
Hi Dozer,I'm currently watching some sd1 vitesse wheels on ebay.If you don't mind i would like some information regards fitting them to thingy.
Are there any modifications that have to be done to fit these wheels ie;will they need spacing and what wheel mounting bolts did you use,also anything else that needs to be done.
Many thanks in advance
Cheers
Trev

PS sorry for highjacking your thread:I
back to my "rootes"
 
http://cgi.ebay.co.uk/dodge-pickup-hotrod-street-rod-classic-hot-rod_W0QQitemZ200195271197QQihZ010QQcategoryZ18301QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.co.uk/classic-commer-hot-rod-sleeper-modified-surf-bus_W0QQitemZ200195276191QQihZ010QQcategoryZ2192QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

:(

good luck with sale, sorry you have to part with them[V]

Bessie - four star commerdation
 
hi daytona ... the stud wholes have to b enlarged as the commer studs are thicker than the sd1 ... and the sd1 requires sleeved deep wheel nuts as they are alloys ...plus you need to widen the centre whole so it fits over the front hub not much though .. i did all five that way it doesnt matter which one you use as a spare .. i used inch thick spacers on the front to take the wheels away from the steering arms ' on mine the wheels wouldnt have gone on other wise ... if you can do the work your self excellent if not iv got a finished set in .. the for sales section ...
 
Hi Dozer, Thanks for the quick reply, I am very interested in your wheels. Do you need longer studs for the spacers and what size are the wheel bolts.
Many Thanks
Trev

back to my "rootes"
 
spacers i used come with there own nuts studs that extend yours .. will check tomorow the part no 4 you ... and nut sizes that match the wheels :)
 
well peps frankie is gone :( but to a lovely bloke and his family .. the are gonna tour europe in him :D he will take part in the forum in the near future ,,,
 
sounds like he,s found a good home :) any plans to replace him dozer [?]

"you were only supposed to blow the bloody doors off no.3"
 
Sorry to here its gone Trev,
(you may not be ££! worth every penny.)
But I guess you will return..
Good luck with the op..
Will;)
 
hi will congratulations m8 & thanks ' i dont think the van could be in better hands .. am not sure wot comes next tim still toying with doing the dodge but am uncertain of my recovery time .. am very stubborn but as you all no building something from scratch means a lot of time on your knees or bent over in awkward shapes ..shall no a bit more when i have the pre op chat ' if i can track down a step side bed then will store till im up and running ..:D
 
May I add my best wishes for your op Mr Dozer! And never fear . . .

six-million-dollar-man.jpg


. . . although I'm not sure about the faster bit, I've seen you drive :p

I'm sure you'll be back on your knees in no time! (fnar) :D
 
thanks minky , hope to maybe see you and the rest of the commer clan at a meet soon if theres one befor my op :D ..
 
you mean this one dozer

http://cgi.ebay.co.uk/1978-DODGE-BLUE_W0QQitemZ170195075018QQihZ007QQcategoryZ122148QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

"you were only supposed to blow the bloody doors off no.3"
 
You must log in or register to reply here.
Back
Top