Commer cross section help...

jimberlake

jimberlake

0
Have search through the threads but can't seem to find an answer, any help would be great please.

The builder is designing the pitch roof for the open end garage and the trusses need to be built and high enough to allow the camper to fit under. I know the SuperVista is a one off but looks very similar dimensions pop top wise to an Autosleeper, except the roof lights that I'll guess at height and width.

Was wondering if anyone had the cross section heights and widths for an Autosleeper van, total height, pop roof section, normal Commer roof section etc. Van is in Birmingham so struggling to get down to measure up.

I've attempted a (bad) diagram to show what I mean all.

Thanks in advance if anyone can help. (the drawing is pretty much how tight its going to be on the sides and top!)

commer.jpg


Hasta la supervista baby
 
Hi Jim, Harvey is an Autosleeper and sits quit high on his springs so these measurements should be OK:-
Height to top of pop-top 83"
Width of pop-top 54"
Height to original van roof approx 79"
Width of van at gutters 60"
Hope this helps.

th_IMAG0033.jpg

How refreshing
 
I'll have to start charging for these mercy missions into the cold and dark;)

th_IMAG0033.jpg

How refreshing
 
I'll get you a beer at the NEC if you're there as a starter for 10.

It really is much apprieciated, Once I have my van I'm hoping i'll be able to help more people out on here.

Hasta la supervista baby
 
You must log in or register to reply here.
Back
Top