Clutch slipping

M

mattmayatt

0
Hi everyone , got a problem with the clutch on my commer wanderer its slipping a LOT.
Anyone got any ideas on how to fix this or will i need a new clutch, if i do need a new clutch where is the best place to get one and is it worth while fitting any other parts while the clutch is out.
Cheers for any info.

Matt
 
Renew all three parts of the clutch and while you at it change the crankshaft spigot bearing, only a couple of quid from Speedyspares. Have a look at the core plug that's hidden behind the gearbox, they are prone to rusting through and it would be good practice to dig it out and change it.

th_DCP_9918.jpg

Summer's Coming
 
On ours we had to change the core plug behind the flywheel, as it was weeping:(
Also, I would check the fork arm pivot alloy casting holding bolts are tight, as ours worked loose.
 
Make sure that the pushrod is fully engaging (hydraulics) before hauling out the mill.

Cheers
Jules

RatSport www.ratsport.co.uk
 
You must log in or register to reply here.
Back
Top