Help needed please, So I got my van started after sitting for 7 months, and fitting new starter motor and battery, the clutch pedal had no resistance so we bled the system, no change, I can engage gears with the engine off but not when its running.
The clutch arm?? at the end of the slave cylinder piston seems to be fully engaged pushed towards the rear of the van, and there seems to be no resistance from the clutch, So I took off the half moon shaped plate(lower clutch housing cover plate?) to look inside,it was very oily and a fair bit of brown gunk and I found a loose 3inch diameter circlip or washer? not sure as it is partly damaged, there also seems to be a bit of End Float play? not sure what to do next as its new territory for me,
many thanks Cemlyn
The clutch arm?? at the end of the slave cylinder piston seems to be fully engaged pushed towards the rear of the van, and there seems to be no resistance from the clutch, So I took off the half moon shaped plate(lower clutch housing cover plate?) to look inside,it was very oily and a fair bit of brown gunk and I found a loose 3inch diameter circlip or washer? not sure as it is partly damaged, there also seems to be a bit of End Float play? not sure what to do next as its new territory for me,
many thanks Cemlyn