camshaft for alloy headed engine

Wouldn't we all;) Unfortunately dropping the cam in by itself isn't a good idea without the Holbay head and manifolds, the porting is different to the 'normal' ally head:I Pretty sure the pistons are different as well.
What's up with the cam you've got?

41fa30c8-22ce-43e8-bd12-188475a80292.jpg
 
Holbay set up would be ideal for a Commer as it's more about low and mid-range torque rather than outright BHP.

BazRockscropped.jpg

I am not a person, I am a number, 395 actually......Be seeing you!
If I told you I was a pathological liar, would you believe me?
 
I've got a holbay head, and flat top pistons, but no camshaft. Finding a cam is proving difficult so I'll settle for any cam that fits at the minute. I'm going to build a torquey motor so even if I had to get one reground it wouldn't be so bad.
 
Lucky boy[8D] This may be of interest to you.

http://forum.commervanfan.co.uk/topic.asp?TOPIC_ID=8298&SearchTerms=holbay+cam

41fa30c8-22ce-43e8-bd12-188475a80292.jpg
 
I have a Holbay in mine. Works nicely. Kent ground a cam for me. :)

Cheers
Jules

RatSport: www.ratsport.co.uk

Twitter: https://twitter.com/RatSport
 
You must log in or register to reply here.
Back
Top