[8D] [8D] [8D] [8D] [8D] [8D]
[/IMG]
Back of the garage
- Thread starter Panky
- Start date
[8D] [8D] [8D] [8D] [8D] [8D]
[/IMG]
Ooooh the thrills, drama, suspense [^][8D]
"you were only supposed to blow the bloody SLIDING doors off"
[^][8D]"you were only supposed to blow the bloody SLIDING doors off"
Keep going Panky there is still 3 Months & 25 Days for our Commervoy to Martins keep up the good work
Bernie Heidi & Gladys
[/IMG]
Bernie Heidi & Gladys
Glad to see this post past without a 'Centennial' bug !
Now did I hear the phrase 'almost done' ?? Cool indeed [8D]
'Hunny' our Commer Hi-Tor by TorCars
Now did I hear the phrase 'almost done' ?? Cool indeed [8D]
'Hunny' our Commer Hi-Tor by TorCars
Not quite up to Bernies hyperdriven antics but a satisfying few hours on Harvey this weekend.
First the plumbing for the by-pass/heater pipes
The pipe routed through the heater valve is the bypass that runs to the pump suction, the other side of the T piece runs to the heater and then back to the pump - shut the by-pass valve and all the luvverly hot water warms your toes (not through direct contact hopefully:I)
You can just see the return pipes tee'd into the bottom rad hose
After a mad few hours yesterday with the wire brush cleaning the surface rust out of the gutters then sloshing the Aquasteel around, today was spent smearing filler to even out some minor pitting - and a lot of rubbing down[xx(]
Nearside dry flatted just needs a final wipe down
I let a 6" repair section into the fluted panel above the wheel arch
The new lower cill in place
It's exciting
First the plumbing for the by-pass/heater pipes
The pipe routed through the heater valve is the bypass that runs to the pump suction, the other side of the T piece runs to the heater and then back to the pump - shut the by-pass valve and all the luvverly hot water warms your toes (not through direct contact hopefully:I)
You can just see the return pipes tee'd into the bottom rad hose
After a mad few hours yesterday with the wire brush cleaning the surface rust out of the gutters then sloshing the Aquasteel around, today was spent smearing filler to even out some minor pitting - and a lot of rubbing down[xx(]
Nearside dry flatted just needs a final wipe down
I let a 6" repair section into the fluted panel above the wheel arch
The new lower cill in place
It's exciting
Your dead right Panky its really exciting you are all working very hard for the Birthday Bash.
Us girls are really proud of you, we don't mind doing the cleaning washing cooking and gardening while you get our acommerdation ready.[8D]
you are all working very hard for the Birthday Bash. Us girls are really proud of you, we don't mind doing the cleaning washing cooking and gardening while you get our acommerdation ready.[8D]
Bernie Heidi & Gladys
Hot stuff [8D]
"you were only supposed to blow the bloody SLIDING doors off"
"you were only supposed to blow the bloody SLIDING doors off"
Its easy to understand, this one will work, unlike the standard system
"you were only supposed to blow the bloody SLIDING doors off"
"you were only supposed to blow the bloody SLIDING doors off"