S0updragon
Well-Known Member
Looking brilliant!
Back of the garage
- Thread starter Panky
- Start date
In love with this... Stunning!
I couldn't find any thermal blinds that would fit so I made some 
It's a bit crinkly as the material came folded not rolled but hopefully the creases will become less obvious with use.
Note gaffer tape reinforcement inside around the suckers as the material is quite thin.
It's a bit crinkly as the material came folded not rolled but hopefully the creases will become less obvious with use.
Note gaffer tape reinforcement inside around the suckers as the material is quite thin.
I've been out of the loop for a while and missed the reveal; Wow!
Harvey looks fantastic, both inside and out.
Harvey looks fantastic, both inside and out.
Same here, been out a while with kids getting the way - great job done. That colour choice is spot. Can’t wait to her her in the flesh
I was thinking back to some of the horror stories we've heard about recovery vehicles wrecking track rod arms because they couldn't find anything else to attach a tow rope and the general lack of any towing points. Not that I'm planning any breakdowns I decided to attempt to address the problem.
Big chunk of 8mm x 25 mm bar was bent into shape to match the curves of the bumper bracket and a 16mm hex connector welded on with a 10mm x 25mm plate as a spacer.
A van towing eye with a matching thread was used.
Fitted in place
I had to take a couple of mm of the eye to clear the bumper when screwing the eye into place.
I'll probably make another for the other side for completion.
Big chunk of 8mm x 25 mm bar was bent into shape to match the curves of the bumper bracket and a 16mm hex connector welded on with a 10mm x 25mm plate as a spacer.
A van towing eye with a matching thread was used.
Fitted in place
I had to take a couple of mm of the eye to clear the bumper when screwing the eye into place.
I'll probably make another for the other side for completion.
S0updragon
Well-Known Member
Build it and they will come. Very clever. Now you just need to make some more so people can buy them
. Now you just need to make some more so people can buy them
S0updragon
Well-Known Member
That would certainly happen if I attempted to make one lol. Does it bolt onto the bumper bracket?
S0updragon
Well-Known Member
Can be left in place then and just screw the eyebolt in if you break down. Useful setup. Just like a posh car lol
S0updragon
Well-Known Member
If it was red it would be faster. But apart from that brilliant lol
That’s superb! Love it
S0updragon
Well-Known Member
The fun never ends lol.