A little inspiration........

commeracer

commeracer

0
Found this, which gave me a little boost today to start digging it out for a feasibility study :p

http://www.youtube.com/watch?v=ehZ5MpXSZ6g&feature=related

Looks like it has to go back a few inches and have the sump reversed, but it looks like a go-er :p[^][8D]

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Well Tim thats the heater motors sorted then, but what would you use to power the van[?][?][}:)]:D

The early bird catches the worm... but the early worm gets eaten first!
 
According to my calculations, my 351c should be as economical, or better than the 1725 ;)
Not quite as powerful as that one though :I but just about enough for the heater :D

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
It would be good with a hemi.
The 351 motor is a big wide engine you wont need a heater;) or is it going in the back my mate has one in a mk1 escort its not so easy to get go faster parts for hes got ally heads its a lot better with them
got me thinking i must start my 302 up i dont think i have this year i must get a few things done next year
 
Trying to get it in as normal as possible Pete, as i still need a useable van ;)
quite agree, ali heads are a good thing to have [8D]
There is very limited tuning goodies available for them, but then they don,t need much ;)

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
You must log in or register to reply here.
Back
Top