SOLD : Put the smile back on your Commer !

Paul Goldsmith

Well-Known Member
My last set of grills and trims, not perfect but very tidy and useable - I'm asking £25.

Already improved after a good wash !

I'll polish the edging to show how well they come up and a test area on the grill too. I'll also straighten out as best I can.

Sadly no corners or clips.

For UK postage, this will be £7.50 - I will mount to a wooden board and protect with bubble wrap and card.

CG1.jpgCG2.jpg

After straightening and initial polish

20190807_121834.jpg
 
Last edited:

Paul Goldsmith

Well-Known Member
After a straighten and an initial polish of the surrounds and on the centre of the grill too.
With a bit more elbow grease they'll certainly improve further.

20190807_121834.jpg
 
Last edited:

Paul Goldsmith

Well-Known Member
My apologies !
I've been crazily busy with work and this slipped my mind - I've just now dropped it off and IM'd you the tracking reference
 

Paul Goldsmith

Well-Known Member
Hi Paul. I don’t suppose you have a top grill? Mine has some rust holes in it
The ones I have are a bit rough but will send you a pic to see whether they're better than what you have.

The one I have for myself is in great condition, at some point I'm going to follow up getting it scanned and 3D printed in plastic. My thinking is it'll be a bit weak but might be OK once bonded to the stainless steel mesh backing ...
 

S0updragon

Well-Known Member
C55B2897-1699-4F85-9EDF-B24076FE531B.jpegThank you. This is mine. I was hoping for one in chrome but may have to paint it silver. Let me know if yours are better. Thanks
 

bazzateer

Well-Known Member
The ones I have are a bit rough but will send you a pic to see whether they're better than what you have.

The one I have for myself is in great condition, at some point I'm going to follow up getting it scanned and 3D printed in plastic. My thinking is it'll be a bit weak but might be OK once bonded to the stainless steel mesh backing ...
They can 3-D print metal now
https://markforged.com/metal-x/?mfa=sga-em-tof-metalaudience&adg=81534068527&kw=metal 3d printing&device=c&gclid=EAIaIQobChMIkIjUqOLN5AIVFeDtCh15qgOLEAAYASAAEgK8P_D_BwE
 

Paul Goldsmith

Well-Known Member
View attachment 5608Thank you. This is mine. I was hoping for one in chrome but may have to paint it silver. Let me know if yours are better. Thanks
I was pleasantly surprised that it looks much better and more solid than I thought - once I washed it and removed all the lichen and moss !
It still has the original mesh and most of it's lugs too. The visible rust on the lower edge certainly hasn't holed to the other side.
Let me know if you're interested.

20190914_104610.jpg20190914_104630.jpg20190914_104617.jpg20190914_104639.jpg
 
Top