Fitting a RC40

commeracer

Well-Known Member
due to the massive number of requests, here is the official RC40 fitting guide :)

This is what it should look like

7054228941_75cdf1a453_z.jpg


7054228999_46c5549bf0_z.jpg


Use the Commer downpipe and cut it at the end of the last bend, then weld on a 42mm o/d adaptor like this

7054228975_48c13cd8ea_z.jpg


That sorts the first box out. then some cutting and shortening to get the two boxes closer together like this

7054228985_405cae5f94_z.jpg


They can be welded together or clamped, but make sure you have the angle right before welding, best to tack and trial fit everthing as you go along.

Outlet pipe was cut off and rotated to suit then welded back on

7054228991_ea266b1931_z.jpg


Then add some hanger brackets wherever to suit. A couple of rubber cotton reel type mounts and job done :)

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"

I'ze stickied it:)
 
Top