Stainless exhaust manifold

commeracer

commeracer

0
Here we go :)

8402604435_00c0ef5047_o.jpg


8403696224_0852c3138a_o.jpg


8403696670_31a41c9a33_o.jpg


8402605985_d8a6dba4ff_o.jpg


Not quite finished yet, needs pickle passivating and the flanges skimming, but nearly there.
All 316 stainless, with a volume of 2.5x a cylinder. The best type of manifold possible for anti-reversion and reducing backpressure :)

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
This one,s Colin,s :)

Around a hundred quids worth of stainless there [:0]



4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
Indeed [}:)]

Don,t think it would work with a STD inlet as it,s too close to the middle ports [xx(]

4650583641_dba2503b41_o.jpg

"You,re only supposed to blow the bloody SLIDING doors off"
 
You must log in or register to reply here.
Back
Top